HMS305-16A/B

Products:

Hardness of 15 degrees A, the low hardness

Excellent dimensional stability

Low leakage

Fast hardening or optimum operating time

Uses:

1. For mold making

2. Shoes and plaster molds

Specifications:

Hardness: 15 +2 ° A 15-2 ° A

Operating time: 20 ~ 40min

Touch Time: 2 ~ 4hr

Stripping Time: 4 ~ 6hr

Tensile Strength: 30 +2 kgf / cm ^

Elongation: 450-100% 450 +100%

Tear Strength: 15 +2 kgf / cm 15-2 kgf / cm

Shrinkage rate: 0.13%

Icon:

Main agent: HMS305-16A

Color: creamy white

Viscosity: 20000 ~ 40000 CPS

Capacity: 3kg

Hardener: HMS53B

Color: clear yellow

Viscosity: 5 ~ 10 CPS

Capacity: 90g

Mixing ratio of 100:2 to 3

Operation:

1. Will be the main agent of about 1 to 2 minutes stirring, and then hardening agent into the mix 1 to 2 minutes, the speed of about 100 ~ 200rpm, do not high-speed stirring.

2. Into the vacuum devices vacuum of about 1 to 2 minutes, the exhaust about 2 times.

3. Out into the mold (the mold to be coated with release agent to facilitate demolding) natural flow levels, dry stripping.

4. Hardener recommended below 20 ℃ with 2.5%, 25 ℃ with 2.0%, 30 ℃ or above 1.5%