HMS302A/86B

Products:

Easy to operate, dimensional stability

High resistance to tear strength, better defoaming property

25A hardness

Features:

Main agent: HMS302A

Color: cream

Viscosity K (flow coefficient): 30,000 ~ 50,000 CPS

Hardener: HMS86B

Color: clear yellow

Viscosity K (flow coefficient): 5 ~ 10 CPS

Ratio of the main agent: curing agent = 100: 2

Hardness: 25A

Operation:

1. Will be the main agent of about 1 to 2 minutes stirring, and then hardening agent into the mix 1 to 2 minutes, the speed of about 100 ~ 200rpm, do not high-speed stirring.

2. Into the vacuum devices vacuum of about 1 to 2 minutes, the exhaust about 2 times.

3. Out into the mold (the mold to be coated with release agent to facilitate demolding) natural flow levels, dry stripping.

4. Hardener recommended below 20 ℃ with 2.5%, 25 ℃ with 2%, 30 ℃ or above 1.5%,

Hardening can be adjusted according to demand dose.