Engine---Hi-temperature Heat Insulation Tape
  The Best Choice for Engine Exhaust to Equip with Heat Insulation Device
Hi-temperature Heat Insulation Tape
Search List ¡@  
Introduction
¡@ Material quality reported
¡@ ¡@ ¡@ ¡@


Remark:

Usage front suggest that used the gas to spray to ascend to burn first, burn of process would become first black and emit smoke, partial place may have the flame creation, then change back white, this is the normal phenomenon of this special material, please have peace of mind the usage, if dislike the trouble can also directly tie up to round up, just need to have the mental state to prepare would emit smoke invite half an hour to a hour, due to row windpipe of the temperature didn't reach up to thousand, so greatly part of places also can't change back white, but would park the or so color of deep coffee color, this is normal phenomenon, as not believe can take again a small segment use spray the light again burn then detection can re- become the white! (Some gas stove temperatures still not enough), it burns of the process can see the diagram!! 
    Please manage in the open spaces everywhere, and please remember to open the cold air system to go to indoor circulation mode.This kind of phenomenon was mainly the porcelain and ceramics' fiber to lead short, spinning hour need the blend into 15% low temperatures generally fiber. 


The heat of our company's cutting off the hot king is to adopt the porcelain and ceramics fiber, this is a kind of new extremely hot fire-proof material, belonging to the new generation extremely the hot fire-proof material, having the weight light, bear the heat, the anti- heat earthquake, low heat to permit, the heat preservation function good, the chemistry stability good etc. advantage, and raise underneath advantage.

  1. The good normal temperature, the heat anti- pulls the strength.
  2. Good features size stability.
  3. Good anti- vibration, impact.
  4. Good percolation, eliminate the sound and seal completely the function.
  5. The construction convenience.
  6. Now special price:300
    Specification:Long 130 cms* the breadth 5 cms* thick 0.5
    ¡°The single time orders four boxes of don't need to pay the freightage ¡°
Porcelain and ceramics fiber textile product function:

Content

Indicator

Burn-down Volume (%)

15 2%

Fiber Diameter (m)

2 ~ 5

The most high usage temperature

1260 ¢J

Heat constringency rate

< 4% ( 1150 ¢J , 9 Hours at Stable Temperatures)

Transmit heat the department number

< 0.2 ( 800 ¢J )

Residue ball content

No

Permit heavy

300 ~ 1200

The porcelain and ceramics fiber textile product of our company and the asbestos textile product of the extensive usage compare, also ising following of advantage
Continuously using the temperature can amount to 1000 ¢J , short time's using the temperature can amount to 1260 ¢J , far and far high product in the asbestos.
Compare the asbestos ware contain sour better anti-, alkali, oil, water, the spirit function, also there is anti- aluminum, zinc etc. the meltdown metals erosion ability.
The better heat strength and heat preservation separate the hot function.
The good electricity insulates the function, especially the heat electricity insulates the function.
Not poisonous and harmless, to the environment all good influence.

This entity installs

Chassis
Engine
Other
European
Asian



   
TEL : 886-3379-7183 ; 886-919-346775
FAX: 886-3378-9647